Understanding Water Jet Cutting Technology Helps Manufacturing Firms Cut Costs!
Water Jet cutting services make use of a super high pressure stream of water that carries an abrasive grit. This abrasive mixes with the water through a venturi effect in what is commonly called the ?focusing tube? just prior to cutting. This mixture of water and abrasive grit exit the focusing tube at speeds of approximately mach 2.5. Cutting pressures range between 45,000 to 60,000 psi for standard cutting models. For brittle, fragile, or delicate materials, piercing pressures range between 15,000 to 20,000 psi, and resume the higher cutting pressures when the pierce has been completed. This low pressure pierce is not true of all machines, and cutting models.
Manufacturing companies are always looking for a cost effective edge. Wasted material, time spent in secondary operations, machine wear, and man hours relate to rising manufacturing costs. Water Jet cutting services offer a flexible and versatile alternative to other types of two dimensional cutting for most materials.
A water jet cutting service can be your defense in the cost battle. Metal cutting services help reduce material cost by reducing material waste. Parts are tightly nested using nesting software to maximize material usage. Machine wear, and no necessity for secondary processes, save you significant amounts of money per year. Custom blanks and prototypes are cut to customer specifications, using metals such as stainless steel, aluminum, brass, bronze or copper in a variety of shapes or dimensions.
This technology allows clients to think unconventionally in terms of material usage. Made-to-order blanks can be produced whether you need low precision parts (+-.003 in.) with a smooth cut edge, or parts that are merely blanked to close tolerances, and then given a final pass on the mill to bring them into exact tolerance. The capability to cut complex shapes with a high level of speed and accuracy is accomplished.
Your company benefits in other ways also. High pressure water cutting is considered a green technology. A cold cutting method, which produces no heat damaged areas, no mechanical stress. No vapors or hazardous materials are produced. You can advertise your manufacturing methods as environmentally safe.
Reflective materials, such as stainless steel, polished brass, conductive materials, heat resisting, and heat sensitive materials can be cut with little or no discoloration, and no heat affected zones. With the ability to perform stack cutting on thinner materials, an achievement other cutting technologies lack, the cost effectiveness simply soars.
For these and many more reasons, the Water Jet process is the most versatile and fastest growing cutting technology in the world.
Cutting service companies like Wet Jet Precision perform services for a wide range of products from blanking parts for the military?s 50 caliber machine gun, to burner and emission control components for the automotive industry. If you are looking to cut your costs, then outsourcing your metal cutting services very well could achieve that result.
This is why we offer this service as the number one cutting solution for our clients. You get a clean edge with high quality. The parts are simple to fixture, increasing turnaround times. If your business is building jet engine parts, metal components, custom gauges, special equipment or electrical assemblies, our services are just what you need. Higher productivity, equals Increased profit!
Dennis Darger at Wet Jet Precision can be reached toll free (888) 707-5077 to discuss production saving cost for your company. Services are nationwide. View their work at http://www.wetjetprecision.com and email Dennis at info@wetjetprecision.com. Copyright 03-28-08
|
|
 |
 |
|
Homemade Colon Cleanse For a Healthy Makeover
A homemade colon cleanse, from the name sounds really medical However, in reality, it is much more simple after the initial hurdles are crossed and after one gains confidence with a straightforward detoxification plan
Clean Slates and Fresh Starts
Hope, excitement and anxiety all wrapped up in fresh haircuts and new clothes. Pens, pencils and notebooks, the smell of a new box of crayons and a brand new book; it all speaks of such promise.
Renewal by Andersen Replacement Windows Feature Energy Star Efficiency and Low E-4 Glass to Weather all Seasons
New England and Massachusetts area window replacement specialist emphasizes 35% greater winter efficiency.
Ewing Partners with WeWrite LLC to Develop Children's Book on Water Conservation
Ewing Irrigation, Golf & Industrial has partnered with WeWrite LLC to develop a children's book focusing on water management and conservation.
Green Movement Gains Tangible Momentum Against Plastic Waste with Earth Day Introduction of reusable "Back To The Tap" carbon filtered sports water bo
The movement to stem the tide of global plastic waste has gained a boost from a North County San Diego company now marketing a carbon filtered personal water bottle line that delivers big dividends for the environment while saving money for the consuming public. Each Back To The Tap Sports Bottle's patented carbon filter component "filters as you drink" and has a 3-month daily use life span that will effectively eliminate an average of 300 bottles from ending up in land fills. A typical consumer will save over $300 during that period.
Water Filter Provides Safe Water Free From Arsenic
If you utilize water from a well that gathers its sources from ground water you should be concerned with arsenic.
No Need for Cosmetic Surgery with New Approach to Deep-clean Complexions with "The Face Wrap"
After trying steam, masques, peels, abrasive cleaners, massages, and a full battery of creams, oils and lotions on your face the skin still appears dull, irritated, puffed, or saggy - the creator of a new complexion care product suggests that it may be time to draw out the impurities with a new approach to facial care called "The Face Wrap". (www.thefacewrap.com)
Eye Health - 9 Simple Ways to Keep Your Eyes Healthy
Do you eyes feel tired and sore by the end of the day? Modern life puts a lot of stress on our bodies and eyes are among the first things to suffer. But it doesn't have to be this way.
A Healthy Life, the 4 Basics of a Healthy Life and the 3 Important Habits that Create Good Health
Good health is easy but being sick is hard. The truth is, maintaining good health is pretty simple although reclaiming it takes patience, consistent actions and smart choices.
Have You Heard The News Around The Water Cooler?
Everybody has heard the phrase ?Guess what I heard at the water cooler? and it is associated as work place gossip. Usually when you think of a water cooler, you think of a work situation where employees can get a cool drink, but things have changed and so has the water cooler. Let?s talk about the evolution of water coolers, how they are different from the past and where they are being used.
Healthy Parenting Styles
Parenting is an instinctive process, but is often colored by the types of parenting styles that the father and mother have been exposed to themselves. The emotional baggage they bring into their marriage usually has a role to play in all their relationships. Despite this, most parents are keen on doing their best for their children, something every child instinctively recognizes. Hence whichever types of parenting styles, according to the book, that the child receives, the inherent bond of love is the strongest governing factor.
Pakisan - Land Of The Pure
Pakistan, "Land of the Pure", officially the Islamic Republic of Pakistan, is a country located in South Asia that overlaps with the Greater Middle East. It has a thousand-kilometre coastline along the Arabian Sea in the south and borders Afghanistan and Iran to the west, India to the east and the People's Republic of China in the far northeast.
Kristina's Kafe Online Coffee, Book, and Music Store
A virtual coffee shop...pleasure for the sense.
Is Farm Run Off Polluting our Drinking Water?
Feces are a natural part of every day life; in fact the ground we walk on and grow our food in is the by-product of one animal species or another. While manure is organic in nature and may even be very useful to humans, sometimes large amounts of manure can pose a significant hazard to our way of life.
A Basic Guide To Keeping Your Bicycle Clean
A clean bicycle will be a well tuned bicycle and will serve you much better than a greasy, grimy bike that you rarely have time to wash. Everything on your bike is open and easily attacked by dirt and grime and if you do not regularly clean it off, you risk not only losing performance, but endangering yourself with shoddily performing parts.
|
 |
|
